Sep 06, 2023 350-401 Exam Crack Test Engine Dumps Training With 751 Questions
Obtain the 350-401 PDF Dumps Get 100% Outcomes Exam Questions For You To Pass
Cisco 350-401 ENCOR Exam covers a wide range of topics that include automation, virtualization, security, network assurance, infrastructure, and services. 350-401 exam consists of 90-110 questions and lasts for 120 minutes. It is available in both English and Japanese languages and can be taken at any Pearson VUE testing center worldwide.
The Cisco 350-401 exam covers a broad range of topics, including network architecture, automation, security, routing, switching, and wireless technologies. It tests the ability of IT professionals to design, implement, and troubleshoot complex enterprise network solutions in a variety of scenarios. 350-401 exam also evaluates their proficiency in using industry-standard protocols and technologies to optimize network performance and ensure network security.
NEW QUESTION # 148
Which action is a function of VTEP in VXLAN?
- A. tunneling traffic from IPv4 to IPv6 VXLANs
- B. allowing encrypted communication on the local VXLAN Ethernet segment
- C. tunneling traffic from IPv6 to IPv4 VXLANs
- D. encapsulating and de-encapsulating VXLAN Ethernet frames
Answer: D
NEW QUESTION # 149
Refer to the exhibit.
Which JSON syntax is derived from this data?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: C
NEW QUESTION # 150
How does Cisco Trustsec enable more access controls for dynamic networking environments and data centers?
- A. classifies traffic bused an the contextual identity of the endpoint rather than its IP address
- B. uses flexible NetFlow
- C. assigns a VLAN to the endpoint
- D. classifies traffic based on advanced application recognition
Answer: A
Explanation:
The Cisco TrustSec solution simplifies the provisioning and management of network access control through the use of software-defined segmentation to classify network traffic and enforce policies for more flexible access controls. Traffic classification is based on endpoint identity, not IP address, enabling policy change without net-work redesign.
Reference: https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Apr2016/User-to- DC_Access_Control_Using_TrustSec_Deployment_April2016.pdf
NEW QUESTION # 151
An engineer is describing QoS to a client. Which two facts apply to traffic policing? (Choose two.)
- A. Policing typically delays the traffic, rather than drops it
- B. Policing should be performed as close to the destination as possible
- C. Policing drops traffic that exceeds the defined rate
- D. Policing adapts to network congestion by queuing excess traffic
- E. Policing should be performed as close to the source as possible
Answer: C,E
Explanation:
Reference:
Traffic policing propagates bursts. When the traffic rate reaches the configured maximum rate (or committed information rate), excess traffic is dropped (or remarked). The result is an output rate that appears as a saw-tooth with crests and troughs.
Unlike traffic shaping, traffic policing does not cause delay.
Classification (which includes traffic policing, traffic shaping and queuing techniques) should take place at the network edge. It is recommended that classification occur as close to the source of the traffic as possible.
Also according to this Cisco link, "policing traffic as close to the source as possible".
NEW QUESTION # 152
Which three methods does Cisco DNA Centre use to discover devices? (Choose three)
- A. LLDP
- B. NETCONF
- C. SNMP
- D. a specified range of IP addresses
- E. CDP
- F. ping
Answer: A,D,E
Explanation:
Explanation
NEW QUESTION # 153
Refer to the exhibit.
Which command set must be added to the configuration to analyze 50 packets out of every 100?
A)
B)
C)
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: B
NEW QUESTION # 154
Refer to the exhibit.
A network engineer must simplify the IPsec configuration by enabling IPsec over GRE using IPsec profiles.
Which two configuration changes accomplish this? (Choose two).
- A. Create an IPsec profile, associate the transform-set, and apply the profile to the tunnel interface.
- B. Create an IPsec profile, associate the transform-set ACL, and apply the profile to the tunnel interface.
- C. Remove the crypto map and modify the ACL to allow traffic between 10.10.0.0/24 to 10.20.0.0/24.
- D. Apply the crypto map to the tunnel interface and change the tunnel mode to tunnel mode ipsec ipv4.
- E. Remove all configuration related to crypto map from R1 and R2 and eliminate the ACL.
Answer: A,E
NEW QUESTION # 155
Drag and drop the characteristics from the left onto the routing protocols they describe on the right
Answer:
Explanation:
NEW QUESTION # 156 
Refer to the exhibit. What are two results of the NAT configuration? (Choose two.)
- A. Packets with a destination of 200.1.1.1 are translated to 10.1.1.1 or .2. respectively.
- B. A packet that is sent to 200.1.1.1 from 10.1.1.1 is translated to 209.165.201.1 on R1.
- C. R1 looks at the destination IP address of packets entering S0/0 and destined for inside hosts.
- D. R1 processes packets entering E0/0 and S0/0 by examining the source IP address.
- E. R1 is performing NAT for inside addresses and outside address.
Answer: B,C
NEW QUESTION # 157
Drag and Drop the decryptions from the left onto the routing protocol they describe on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 158
What NTP Stratum level is a server that is connected directly to an authoritative time source?
- A. Stratum 1
- B. Stratum 15
- C. Stratum 14
- D. Stratum 0
Answer: A
Explanation:
Explanation
The stratum levels define the distance from the reference clock. A
reference clock is a stratum 0 device that is assumed to be accurate and has little or no delay associated with it. Stratum 0 servers cannot be used on the network but they are directly connected to computers which then operate as stratum-1 servers. A stratum 1 time server acts as a primary network time standard.
A stratum 2 server is connected to the stratum 1 server; then a stratum 3 server is connected to the stratum 2 server and so on. A stratum 2 server gets its time via NTP packet requests from a stratum 1 server. A stratum 3 server gets its time via NTP packet requests from a stratum-2 server... A stratum server may also peer with other stratum servers at the same level to provide more stable and robust time for all devices in the peer group (for example a stratum 2 server can peer with other stratum 2 servers).
NTP uses the concept of a stratum to describe how many NTP hops away a
machine is from an authoritative time source. A stratum 1 time server
typically has an authoritative time source (such as a radio or atomic clock, or a Global Positioning System (GPS) time source) directly attached, a stratum 2 time server receives its time via NTP from a stratum 1 time server, and so on.
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr920/con
figuration/guide/bsm/16-6-1/b-bsm-xe-16-6-1-asr920/bsm-timecalendar-
set.html
NEW QUESTION # 159
What is a fact about Cisco EAP-FAST?
- A. It requires a client certificate.
- B. It operates in transparent mode.
- C. It is an IETF standard.
- D. It does not require a RADIUS server certificate.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-fixed/72788-CSSC-Deployment-Guide.h
NEW QUESTION # 160
Drag and drop the characteristics from the left to the correct Infrastructure deployment type on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 161 
Refer to the exhibit. R1 is able to ping the R3 fa0/1 interface. Why do the extended pings fail?
- A. R2 and R3 do not have an OSPF adjacency
- B. The DF bit has been set
- C. R3 is missing a return route to 10.99.69.0/30
- D. The maximum packet size accepted by the command is 1476 bytes.
Answer: B
NEW QUESTION # 162
What NTP Stratum level is a server that is connected directly to an authoritative time source?
- A. Stratum 1
- B. Stratum 15
- C. Stratum 14
- D. Stratum 0
Answer: A
Explanation:
Explanation
The stratum levels define the distance from the reference clock. A
reference clock is a stratum 0 device that is assumed to be accurate and has little or no delay associated with it. Stratum 0 servers cannot be used on the network but they are directly connected to computers which then operate as stratum-1 servers. A stratum 1 time server acts as a primary network time standard.
A stratum 2 server is connected to the stratum 1 server; then a stratum 3 server is connected to the stratum 2 server and so on. A stratum 2 server gets its time via NTP packet requests from a stratum 1 server. A stratum 3 server gets its time via NTP packet requests from a stratum-2 server... A stratum server may also peer with other stratum servers at the same level to provide more stable and robust time for all devices in the peer group (for example a stratum 2 server can peer with other stratum 2 servers).
NTP uses the concept of a stratum to describe how many NTP hops away a
machine is from an authoritative time source. A stratum 1 time server
typically has an authoritative time source (such as a radio or atomic clock, or a Global Positioning System (GPS) time source) directly attached, a stratum 2 time server receives its time via NTP from a stratum 1 time server, and so on.
NEW QUESTION # 163
Which DHCP option provides the CAPWAP APs with the address of the wireless controller(s)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
NEW QUESTION # 164
Which function does a fabric wireless LAN controller perform In a Cisco SD-Access deployment?
- A. performs the assurance engine role for both wired and wireless clients
- B. is dedicated to onboard clients in fabric-enabled and nonfabric-enabled APs within the fabric
- C. coordinates configuration of autonomous nonfabric access points within the fabric
- D. manages fabric-enabled APs and forwards client registration and roaming information to the Control Plane Node
Answer: D
Explanation:
Fabric Enabled WLC:
Fabric enabled WLC is integrated with LISP control plane. This WLC is responsible for AP image /Config, Radio Resource Management, Client Session management and roaming and all other wireless control plane functions.
For WLC Fabric Integration:
Wireless Client MAC address is used as EID
It inform about Wireless MAC address with its other information like SGT and Virtual Network Information VN information is mapped to VLAN on FEs WLC is responsible for updating Host Database tracking DB with roaming information
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html#FabricWLC Both fabric WLCs and non-fabric WLCs provide AP image and configuration management, client session management, and mobility services. Fabric WLCs provide additional services for fabric integration such as registering MAC addresses of wireless clients into the host tracking database of the fabric control plane nodes during wireless client join events and supplying fabric edge node RLOC-association updates to the HTDB during client roam events.
NEW QUESTION # 165
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
- A. On
- B. Auto
- C. Passive
- D. Active
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of thecontroller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
+ LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch. ...
NEW QUESTION # 166
......
350-401 Exam Dumps Contains FREE Real Quesions from the Actual Exam: https://passitsure.itcertmagic.com/Cisco/real-350-401-exam-prep-dumps.html