C1000-058 Dumps To Pass IBM Certified System Administrator Exam in One Day (Updated 191 Questions)
C1000-058 Exam Brain Dumps - Study Notes and Theory
IBM C1000-058 certification exam is designed for IT professionals who want to demonstrate their knowledge and skills in IBM MQ V9.1 system administration. IBM MQ V9.1 System Administration certification is suitable for system administrators, technical support personnel, and developers who have experience in installing, configuring, and administering IBM MQ V9.1. C1000-058 exam is designed to test the candidate's understanding of MQ concepts, architecture, installation, configuration, security, performance tuning, and troubleshooting.
IBM C1000-058 (IBM MQ V9.1 System Administration) certification exam is a highly sought-after credential for professionals who wish to demonstrate their expertise in the administration of IBM MQ V9.1 systems. IBM MQ V9.1 System Administration certification validates the skills required to manage and maintain IBM MQ V9.1 systems, including knowledge of installation, configuration, monitoring, and troubleshooting of the messaging infrastructure.
NEW QUESTION # 83
An administrator is connecting to e remote queue manager to perform remote administration tasks using MQ Explorer.
Which two permissions should the administrator set on the target queue manager object for the user running MQ Explorer in addition to DISPLAY? (Select two.)
- A. BROWSE
- B. GET
- C. PUT
- D. INQUIRE
- E. CONNECT
Answer: B,D
NEW QUESTION # 84
Which metric is commonly used to measure system response time in monitoring?
- A. TPS (Transactions Per Second)
- B. CPU Utilization
- C. Memory Allocation
- D. Latency
Answer: D
NEW QUESTION # 85
Which channel may be configured with a channel auto-definition exit?
- A. Receiver Channel
- B. Requester Channel
- C. Client-Connection Channel
- D. Sender Channel
Answer: A
NEW QUESTION # 86
An administrator executes the following control command: crtmqm -q -d Q2 QM1 What is the effect of the above command?
- A. The command creates default queue manager QM1 and specifies Q2 as its default transmission queue.
- B. The command creates default queue manager QM1 and specifies Q2 as its dead letter queue.
- C. The command creates queue manager QM1, queue Q2, and specifies Q2 as its dead letter queue.
- D. The command creates queue manager QM1, queue Q2, and specifies Q2 as its default transmission queue.
Answer: D
NEW QUESTION # 87
What is the significance of a "Pilot Deployment" in the context of software installation?
- A. Installing the software on selected systems for testing
- B. Full-scale deployment of the software
- C. Installation of software updates
- D. Installing the software on virtual machines only
Answer: A
NEW QUESTION # 88
An Application Developer is using a Unix queue manager and wants to know if the queue manager is set as the default.
Where can this information be found?
- A. mqs.ini
- B. qm.ini
- C. Using the command showQueuemanagerDetails
- D. With the MQSC command: DIS QMGR
Answer: A
NEW QUESTION # 89
What is the primary function of Log Analysis in system monitoring?
- A. Assessing user login patterns
- B. Reviewing system events to detect issues or trends
- C. Identifying system configuration changes
- D. Documenting network traffic patterns
Answer: B
NEW QUESTION # 90
Which MQSC command is used to display information about a specific queue?
- A. SHOW QUEUE
- B. VIEW QSTATUS
- C. DISPLAY QSTATUS
- D. DISPLAY QUEUE
Answer: D
NEW QUESTION # 91
For MQ Appliance, which command can be used to set values in the mqat.ini?
- A. setmqenv
- B. setmqaut
- C. setmqat
- D. setmqini
Answer: D
NEW QUESTION # 92
In the context of Availability, what is the purpose of a "Hot Standby"?
- A. A backup system that is warm and requires some initialization to take over
- B. A backup system used for non-critical applications only
- C. A redundant system that is always offline until needed
- D. A backup system that is immediately available to take over if the primary system fails
Answer: D
NEW QUESTION # 93
What is the correct address to get extended information about queue manager TESTQM using the REST API?
Response:
- A. http://ip:port/mq/rest/qmgr/TSTQM?attributes.extended
- B. http://ip:port/mq/rest/qmgr/TSTQM?attributes.extended
- C. http://ip:port/mq/rest/qmgr/TSTQM?attributes.extended
- D. http://ip:port/mq/rest/qmgr/TSTQM?attributes.extended
Answer: D
NEW QUESTION # 94
A new LTS release of IBM MQ is made generally available. The versioning information is 9.0.0.0.
When the next level of fixes is made available for this product what will the versioning information look like?
- A. 9.0.1.0
- B. 9.0.1.1
- C. 9.0.0.1
- D. 9.1.0.0
Answer: C
NEW QUESTION # 95
In performance tuning, what does "Overclocking" refer to?
- A. Enhancing system security
- B. Running system components at higher speeds than their default settings
- C. Optimizing network protocols
- D. Reducing hardware power consumption
Answer: B
NEW QUESTION # 96
In which use case in CONNAUTH the appropriate security control?
Response:
- A. To encrypt data in transit
- B. To comply with password complexity, refresh, and lockout policies
- C. To authenticate the IP address or DNS name of the remote client
- D. To provide non-repudiation functionality
Answer: C
NEW QUESTION # 97
What is the result of running the rpm -qa| grep MQ Series command on a Linux server?
- A. Removes packages
- B. Installs packages
- C. Displays packages
- D. Adds packages
Answer: C
NEW QUESTION # 98
For MQ Advanced for distributed platforms, which two components are included?
(Select two.)
Response:
- A. Managed File Transfer
- B. Advanced Message Security
- C. IBM MQ Internet Pass-Thru
- D. MessageSight
- E. MQ Appliance
Answer: A,B
NEW QUESTION # 99
The following commands are issued on QMGRA:
DEFINE QLOCAL(SATURN)
DEFINE QLOCAL(QMGRB) USAGE(XMITQ)
DEFINE QALIAS(MARS) TARGET (VENUS)
DEFINE QALIAS(PLUTO) TARGET(SATURN)
DEFINE QREMOTE(VENUS) RNAME(SATURN) RQMNAME(QMGRB)
The following commands are issued on QMGRB:
DEFINE QLOCAL (mars)
DEFINE QLOCAL(QMGRA) USAGE(XMITQ)
DEFINE QALIAS(SATURN) TARGET(VENUS)
DEFINE QALIAS(PLUTO) TARGET(VENUS)
DEFINE QREMOTE(VENUS) RNAME(PLUTO) RQMNAME(QMGRA)
Where does the message go when it is put to MARS on QMGRA?
- A. SATURN on QMGRA
- B. MARS on QMGRB
- C. MARS on QMGRA
- D. SATURN on QMGRB
Answer: A
NEW QUESTION # 100
An administrator has been given the requirement to enable MQ queue (Q1) in such a way that APP_A can only put a message on the queue Q1 and Application APP_B can only get a message from queue Q1.
What is one way an administrator achieves this?
Response:
- A. By controlling access at SVRCONN channel used by the applications(APP_A and APP_B) to connect to QMGR
- B. By creating two separate alias queues with required attributes
- C. By controlling access level for queue (Q1) using queue attributes
- D. By defining different policies for both applications(APP_A and APP_B) at QMGR level
Answer: C
NEW QUESTION # 101
......
IBM C1000-058 exam is a 90-minute exam consisting of 58 multiple-choice questions. C1000-058 exam is intended for system administrators who are responsible for the installation, configuration, and maintenance of IBM MQ V9.1 systems. C1000-058 exam covers various topics, including MQ V9.1 architecture, installation, configuration, security, monitoring, and troubleshooting. Candidates who pass the IBM C1000-058 exam will receive the IBM Certified System Administrator - IBM MQ V9.1 certification.
C1000-058 Dumps PDF - Want To Pass C1000-058 Fast: https://passitsure.itcertmagic.com/IBM/real-C1000-058-exam-prep-dumps.html